55mm Spiral Types FTTH Pre Embedded Fiber Optic Fast Connector Assembly On-Site
They are mainly used for outdoor waterproof installation and connector FTTH access equipment. Connect fiber input equipment such as the fiber distribution box’s output port is HW adapter, it can be quickly screwed and fixed with the corresponding adapter and then docked with the output adapter. On-site operation is simple and easy to install, and no special tools are required.
55mm Spiral Types FTTH Pre Embedded Fiber Optic Fast Connector Assembly On-Site Features:
- Low insertion loss and high return loss.
- Excellent end-face geometry parameter.
- Easy to operate, high reliability.
55mm Spiral Types FTTH Pre Embedded Fiber Optic Fast Connector Assembly On-Site Application Scenarios:
- FTTH、FTTR and FTTX
- Image transmission Networks
- Optical test instrument
- Photoelectric automatic control system
55mm Spiral Types FTTH Pre Embedded Fiber Optic Fast Connector Assembly On-Site Technical Specifications:
- Material
| SN | Part Name | Material | Remarks |
| 1 | Dust Cap | PE | Consistent with ROHS、REACH |
| 2 | Housing | PBT | |
| 3 | V-groove cover plate | PEI | |
| 4 | Fiber optic V-groove | PEI | |
| 5 | Fiber locking mechanism | PEI | |
| 6 | Spring | SUS304 | |
| 7 | Main-body | PC | |
| 8 | Wire clamps | PC | |
| 9 | Tail sleeve | PC |
- Performance characteristics
| SN | Project | Index | Remarks |
| 1 | Applicable for | Indoor or Outdoor FTTH | Consistent with GR-326-CORE； IEC 61300； YD/T2341.1-2011 |
| 2 | Cable diameter | φ3.0、2.0、0.9mm round cable；2*3mmFlat cable、 | |
| 3 | Operating Wavelength | 1260～1650nm | |
| 4 | Insertion loss | 0.3dB（Typical）;0.5dB（Max.） | |
| 5 | Return loss | APC ≥50dB;UPC≥45dB | |
| 6 | Repeatability | ≤0.2dB | |
| 7 | Interchangeability | ≤0.2dB | |
| 8 | Tensile Strength | ≥45N(Δ IL≤ 0.2dB) | |
| 9 | Operation time | About 50S | |
| 10 | Reusable | ≥10 times | |
| 11 | Operating Temperature | -40～+85℃ |
